EA4 FINISH
EA4 FINISH
Heavyduty Coatings
Nippon EA4 Finish is a two-pack amine-adduct cured epoxy finish for use on steel and cement surfaces where chemical, oil and abrasion resistant coating is required. Nippon EA4 Finish is also available in non-skid quality.Highlights of this product include:Excellent adhesion Good resistance to mechanical damageAbrasion resistanceThis product is usually applied over a suitable primer, undercoat or build-up coat. For maximum performance, apply 2 coats of Nippon Paint's Hycote 51WT Primer as an underlying system. It is highly encouraged to apply the correct paint system when using this product.
Product Features:
Coating System
| # | Type | Product Name | No. of Coat(s) |
|---|---|---|---|
| 1 | Sealer / Primer | 8048 - Indian Red 1462 | 1 coat |
| 1 | Under Coat | 8048 (off white) | 1 coat |
| 1 | Topcoat | EA4 Finish | 2-3 coats |
| 1 | Topcoat | EA4 Finish | 2-3 coats |
Application Data
| Application | Brush, roller, airless spray, compressed air spray |
|---|---|
| Thinning | Brush, roller, airless spray: Dilute with maximum 5% of Nippon SA-65 Thinner; Compressed air spray: Dilute with maximum 10 - 15% of Nippon SA-65 Thinner |
| Touch Dry / Hard Dry | 2-3 hours / 16 hours |
| Recoating Interval | Minimum 16 hours |
| No. of Coat(s) | 1-3 coats |
| Theoretical Coverage | 10.2 m2 per liter per coat (for DFT 50μm) |
Our Colour Cards
Get a Quote
Get a quote or your desired products
Simply fill up the following information, we will connect you soon!